# Guide to Connecting to the Speckle Server

**URL:** <https://community.realtimelca.com/t/guide-to-connecting-to-the-speckle-server/57>\
**Category:** Help\
**Created:** [February 28, 2024, 12:04pm UTC](https://community.realtimelca.com/t/guide-to-connecting-to-the-speckle-server/57 "2024-02-28T12:04:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Inga](https://dub1.discourse-cdn.com/flex005/user_avatar/community.realtimelca.com/inga/32/36_2.png) [@Inga](https://community.realtimelca.com/u/Inga)\
**Post date:** [February 28, 2024, 12:04pm UTC](https://community.realtimelca.com/t/guide-to-connecting-to-the-speckle-server/57/1 "2024-02-28T12:04:02Z")

</div>

# **Guide to Connecting to the Speckle Server** 🔌

Are you experiencing issues connecting your Speckle server? Don’t worry, we’re here to assist you. Follow these steps for a seamless connection:

After activating your e-mail, you will find an e-mail titled “Connect Real-Time LCA with Revit”

1. **Check your Email:** Open that e-mail and look for the Speckle URL we have provided you.

2. **Find the Speckle URL:** Copy the URL provided in the email, the URL is [https://api.realtimelca.com](https://api.realtimelca.com) and then open Revit.

3. **Connect to the Server:** First you must connect to the server, and you can do this under the Login section by selecting “Want to set a custom Server URL”. It’s very important that you paste the exact URL provided in the email and then press GO.

4. **Log in with your Email address:** After that, then you will be prompted to Login with the same email address as you have registered on Real-Time LCA along with the temporary password provided in the same e-mail.

5. **Success!:** Your Revit is now connected with the Speckle Server and you can start sending your quantities from Speckle to Real-Time LCA!